Cooling Elements 3 versions
HDPE BASIC Cooling Pack 0 °C – 200 to 750 g
Water-filled HDPE BASIC hard-shell cooling pack at 0 °C: three formats from 200 to 750 g with item numbers and defined minimum orders.
Choose a configuration
3 configurations from the product table – differences at a glance
Values of the selected configuration
- Nominal weight
- 750 g
- Dimensions (L × W × H)
- 200 × 105 × 40 mm
Choose a version
Gewicht [Größe]
Your configuration
750 g · 200 × 105 × 40 mm
From your selection in the table
- Dimensions (L × W × H)
- 200 × 105 × 40 mm
- Nominal weight
- 750 g
Free and non-binding. We will come back to you with a quote.
Overview
Water-filled hard-shell cooling pack for reusable applications
HDPE BASIC is a robust cooling pack with an HDPE casing and water filling. Three formats from 200 to 750 g are available for suitably designed passive thermal packaging.
| Weight | Dimensions (L × W × H) | Item no. | Units/carton | Minimum order |
|---|---|---|---|---|
| 200 g | 150 × 80 × 20 mm | 12900 | 48 | 40 cartons / 1,920 units |
| 400 g | 160 × 90 × 32 mm | 12901 | 40 | 24 cartons / 960 units |
| 750 g | 200 × 105 × 40 mm | 12902 | 16 | 30 cartons / 480 units |
Application: HDPE BASIC is intended for repeated use. The quantity and position of the packs must match the complete packaging system, payload and transport profile.
Preconditioning: Freeze the packs completely; temperature and duration depend on the tested packout. The 0 °C phase transition must not be equated with product temperature. Inspect the casing and closure before every reuse. The exterior can be cleaned with warm water.
Further versions are listed in the cooling elements overview.
Select the required format above and enter the requested quantity.
Technical data
Configuration: 750 g · 200 × 105 × 40 mm
| Nominal weight | 750 g |
|---|---|
| Dimensions (L × W × H) | 200 × 105 × 40 mm |
| Design | Rigid-shell cooling elements |
| Use | Reusable |
| Cooling medium | Water-based |
| Phase-change temp. | 0 °C |
| Temperature ranges | Below +8 °C; +2 to +8 °C; +15 to +25 °C |
| Features | dimensionally stable; sturdy HDPE shell |
| Item no. | 12902 |
Compare versions
3 versions
| Compare | Select | |||||
|---|---|---|---|---|---|---|
| 750g (200 x 105 x 40 mm) | 750 g | 200 × 105 × 40 mm | 200 g | 12902 | ||
| 400g (160 x 90 x 32 mm) | 400 g | 160 × 90 × 32 mm | 400 g | 12901 | ||
| 200g (150 x 80 x 20 mm) | 200 g | 150 × 80 × 20 mm | 750 g | 12900 |
This combination does not exist — please choose another option.
Related products
Recently viewed
Questions about this product?
Our cold-chain experts will advise you personally on the right solution.
